Sperry Marine Visionmaster FT ECDIS, Руководство пользователя

Страница: 348 / 531

Routes ECDIS User Guide
8-14 65900012
To change the ETD/ETA data do the following:
1. Click inside the ETD or ETA field on the
specific data to be changed. The field
data changes to green (editable) and the
specific data is highlighted. An editing
window appears directly below the
selected field.
2. To move the date or time back click on
the Down arrow, to move the date or time forward click on the Up
arrow. To move the highlight back or forward (e.g. from Month to
Year) click on the side arrows.
3. With the correct ETD/ETA data displayed click on the OK button.
XTD Limits
The XTD Limits area enables a set of distance values to be applied for the
Port and Starboard side of a route. The value represents the limit of
deviation from the planned route at which the off-track alert occurs.
The settings in the Route tab will apply to all legs and turns on a route.
Different XTD limits for individual legs and turns may be made from the
Waypoint tab folder. The default value is 100 metres for the Port and
Starboard sides.
To change the XTD Limits do the following:
1. Click in the PORT and STBD fields, the value changes to green
(editable).
2. Move the trackball left to decrease the value, or right to increase.
Left click again to accept the value.
3. When the XTD alarm limits have been
changed an `Action Required' prompt
appears requesting confirmation of the
alarm change. Click the
OK button to
confirm the change, or select Cancel to
reject the change.
The XTD limits can be viewed along the route, providing Show XTD
Alarm Lines is enabled in Route Display Settings. The XTD alarm
lines are shown as thin red lines either side of the route line.