Sperry Marine Visionmaster FT ECDIS, Руководство пользователя

Страница: 147 / 531

ECDIS User Guide Charts
65900012 4-15
To display only the charts from a specific database click on the Database
drop down arrow and select from the list. The table is re-drawn showing
only those charts assigned to that database.
Chart Outlines
To display chart outlines, tick the Draw Chart
Outlines check box. The display will show the
coverage of the charts within the current display
area as a series of coloured chart boundary
rectangles, the colour of the chart boundary is
dependent on the chart usage level (for example,
charts with harbour usage levels are shown in a
dark blue outline).
Chart Selection
Individual charts may be located and identified on
the chart display. To select a chart tick the
Chart
Selection Cursor check box and move the cursor
to the chart display, the letters SEL are added to
the cursor. Note that the chart selection cursor is
temporary, after a period of 10 to 15 seconds the
cursor reverts to normal and the check box goes
back to unticked.
Click in an area of the chart display. The outline of the chart is drawn and
its area displayed in colour (the colour of the outline and area is dependent
on the chart's usage level). The chart is also highlighted in the Index list.
Go To Chart
The Go to Selected Chart button pans the display to the centre of a
selected chart from the Graphical Index window.
To pan to a particular chart, select the chart by clicking anywhere within the
chart row, and with the selected chart highlighted click the
Go To Selected
Chart button. The display is re-drawn to the centre of the chart boundary
box, TM limits are switched off and a temporary prompt displays TM Limits
Off .
When using the Go to Selected Chart function the following notes should
be taken into consideration:
The function only changes the displayed location. It will not
necessarily display the selected chart if its database is not currently
enabled. If a different chart database is enabled, the operator will