Sperry Marine Visionmaster FT ECDIS, Руководство пользователя

Страница: 442 / 531

Targets ECDIS User Guide
10-38 65900012
Moveable Test Targets
The number of user definable test targets is determined by the type of
radar interface board installed in your VisionMaster system.
The table below defines the number of targets each interface board
supports.
Interface Board Number of
Defined Targets
Test Targets
SC2 2 1 to 2
SC3 5 1 to 5
The current moveable test target is shown in a field below the Switch All
Targets On/Off buttons, and defaults to
Test Target 1 . To select the next
moveable test target, click the > button. If your system only includes two
test targets, as defined in the table above, the > button will be greyed out
when Test Target 2 is selected.
Before the Moveable Test Targets are activated the initial position, which
includes Range and True Bearing may be defined.
When moveable targets are active the target velocity and current position
parameters may be defined.
The table below defines the Range, True Bearing, Speed and True Course
default values and ranges.
Test
Target
Display Range
(0.3 to 40 NM)
True Bearing
(0º to 359.9º )
Speed
(0 to 75 kn)
True Course
(0 to 359.9 )
1 3.0 NM from
turning unit
36° 15 kn
270°
2
3.0 NM from
turning unit
108° 15 kn
180°
3 3.0 NM from
turning unit
180° 15 kn
25°
4
3.0 NM from
turning unit
252° 15 kn
90°
5 3.0 NM from
turning unit
324° 15 kn
135°