Spectrel Reserver, Руководство по установке и администрированию

Страница: 22 / 74

2-4 Reserver for Lotus Notes 1.2 Installation and Administration Guide
Signin account In the [SIGNINACCOUNT] section, enter a SingInName and
Password which are to be used to log on to the Client Registration
System (CRS) for each bridge listed under the BRIDGENAMES
section. The SignInName is case sensitive and must be spelled
exactly the same as the name on the CRS. For example:
SignInName = mlkgwolk
Password = mlkgwolk
Note: Use the Client Registration Server front end System
Administrator screen to create user login on the CRS
which matches the signin account created for Reserver for
Lotus Notes. You must have operator privileges to perform
this function.
Bridge names In the [BRIDGENAMES] section, assign each bridge that Reserver
for Lotus Notes will connect to using the following parameters:
<name>=<IPAddress>,<Active(1/0)>,<Port Num>,<TZ
Name>,<Type>,<System 1>,<System 2>)
name : String containing the bridge name, maximum of 8
characters.
TZ Name : String for the bridge timezone. See the appendix
guide for a list of supported values.
Port Num : Can be any number, the default is 20001.
Type : Must be set to S70/700.
System 1 : System setting, must be set to 1
System 2 : System setting, must be set to 0
Bridge1=127.0.0.1,1,20001,Eastern Standard Time,S70/700,1,0
Note: Spectel recommends that you use port number 20001 to
remain consistent with Internet addressing standards.Valid
port numbers range from 1024 to 65535. The port number
that you use must be specified in the bridge etc/services
file.
Section Name Description (Continued)