Spectrel Reserver, Руководство по установке и администрированию, Страница: 15 / 74

Installation 1-7
Note: You must press
ENTER
(carriage return) at the end of the maillist.txt file before
you run the load convert -f command to update the individual’s standard mail
template to the new template.
To convert the templates remotely, use the Lotus Domino Administrator client
software. For more information on using the conversion utility, see “Upgrading Users’
mail files” in the Lotus Domino Administrator’s help file.
5. See the next section, “Converting the standard client NTF files” to run the load convert
-f command.
Converting the standard client NTF files
To update client-based mail files (NTF) from a text file with the Reserver for Lotus Notes
NTF, enter the following command in the server command window:
load convert -f c:\temp\maillist.txt std* ConfRsrvMail50.ntf/
ConfRsrvMail60.ntf
where
– “f” specifies the mail files that are converted.
– “std” filters the list so that only files with template names beginning with std are
updated.
Tip: If you use the “f” parameter, Spectel recommends that you stop the Domino
mail server from delivering mail while the conversion is taking place. When
the conversion ends, you can restart the server. To find out how to start or
stop the Domino server, see Table 1-1, “Domino mail server commands,” on
page 1-5.
Step 3: Configuring the MLKSched.ini file
See page 2-3 in Chapter 2, “Configuring the Components.
Step 4: Installing the client software (centralized method)
The client installation consists of registering the necessary custom control (OCX) files on
each client machine to set up the Reserver for Lotus Notes environment.
Note: You must have administrator privileges to complete this task.
Follow these steps:
1. Log on to a client machine.
2. Use Windows Explorer to locate the Program Files directory.