Spectra Logic Spectra nTier300, Руководство по установке

Страница: 9 / 88

9
About This Guide
This guide is a supplement to the “Getting Started” chapter in the
Implementing nTier
Deduplication guide and describes the following:
ƒ
Installing the Spectra
®
nTier300
™
Deduplication VTL (referred to as the Spectra
nTier300 VTL or the nTier300 VTL).
ƒ
Configuring the initial IP address.
ƒ
Using the BlueScale web interface to monitor the status of the hardware
components.
After you finish installing the nTier300 VTL as described in this guide, read the
Implementing nTier Deduplication guide, which is included as a PDF on the nTier
Deduplication CD included with the nTier300 VTL, for detailed information about
configuring and using one or more virtual tape libraries using the FalconStor VTL
Console (referred to as the VTL Console).
Intended Audience
This guide is intended for data center administrators and operators who maintain and
operate backup systems. The information in this guide assumes a familiarity with RAID
technology, SCSI and Fibre Channel communication protocols, and network
connectivity protocols such as Fibre Channel, Ethernet, and iSCSI (Gigabit Ethernet). It
also assumes a knowledge of technical tasks such as configuring a Windows Server
operating system, installing drivers, and configuring network connections and that you
are familiar with installing, configuring, and using data backup and archival software.