Spectra Logic Spectra nTier300, Руководство по установке

Страница: 58 / 88

Chapter 4 – Maintenance
58
2. Slide the latch on the drive sled the right to release it, then rotate the handle
outward and to the left (Figure 4-6.
3. With the drive handle in the open position, slide the drive sled into the chassis until
the front of the drive sled is flush against the front of the chassis. The drive sled
slides in easily; do not force it.
4. When the drive sled is in position, push the handle inward and to the right until it
locks in place. An audible click indicates that the drive sled is locked into position.
Note:
The latch occasionally sticks in the open position. If this happens,
simply push it to the left and press the handle inward to lock the
drive into place.
As soon as the drive is seated, it powers on and the process of rebuilding the RAID
volume begins.
5.
Package the malfunctioning drive and ship it to Spectra Logic as described in RMA
Returns on page 61.
o
Figure 4-6 Install the drive sled into the nTier300 VTL.
Sled handle
(open position)
Latch