Spectra Logic Spectra nTier300, Руководство по установке

Страница: 69 / 88

Power Requirements
69
Power Requirements
This section describes the power specifications for the Spectra nTier300 VTL.
Input Power Requirements
Power Cord Specifications
The power cords included with the Spectra nTier300 VTL are considered part of the
unit and cannot be used with any other equipment.
120 Volt-AC Power Cord for Use
in North America
The power cords included with
the Spectra nTier300 VTL appliance are standard, three-conductor, 16-AWG power
cords safe for 120-volt use in the United States and Canada. The cable has a molded
NEMA 5-15P male connector to plug into an electrical outlet and a molded IEC
60320 C13 female connector to plug into the nTier300 VTL power supply.
220 Volt-AC Power Cord for Use in North America
The criteria for a 220-volt AC
power cord for the nTier300 VTL are as follows:
ƒ
It must have a molded IEC 60320 C13 female connector to connect to the
nTier300 VTL power supply.
ƒ
Cordage must be must be SJT type, three-conductor, 16 AWG minimum.
ƒ
It must comply with local electrical code.
Source Requirements
Input Voltage 100-240 VAC
Input Power 400 watts typical, 800 watts maximum
Current 7.0 amps.
Input Frequency 50-60 Hz
Figure 5 120 Volt-AC Power Cord for Use in North America (Spectra
Logic P.N. 8289).
IEC 60320 C13
female connector
NEMA 5-15P
male connector