Spectra Logic Spectra nTier300, Руководство по установке

Страница: 15 / 88

Integrated Server
15
Integrated Server
Figure 1-3 shows the rear panel components of the nTier300 VTL integrated server.
ƒ
Keyboard, mouse, and monitor connectors. Used by SpectraGuard Support for
diagnostics and troubleshooting.
ƒ
Serial port (COM2). Not currently used.
ƒ
Gigabit Ethernet ports. The standard nTier300 VTL configuration includes two
1-Gigabit Ethernet ports. The Gigabit Ethernet ports can be used for iSCSI network
connections to the VTL, as well as for network connectivity for the FalconStor VTL
Console and BlueScale web interface used to configure, manage, and monitor the
nTier300 VTL.
ƒ
USB ports. The USB ports can be used to connect a USB storage device to the
nTier300 VTL for saving configurations and uploading firmware packages. If
desired, you can use these ports to connect a USB mouse and a USB keyboard to
the nTier300 VTL integrated server.
ƒ
Expansion slots. Two expansion slots accommodate one or two optional interface
cards to provide additional connectivity. You can install one 10GbE network
interface card (NIC) or up to two Fibre Channel or SCSI host bus adaptors (HBA),
which can be used to connect the nTier300 VTL to a tape library. The Fibre Channel
HBA can also be used to provide Fibre Channel network connectivity to the VTL.
ƒ
Fans. The enclosure fans circulate air through the integrated server and the
nTier300 VTL enclosure.
Figure 1-3 The nTier300 VTL integrated server rear panel components.
Gigabit Ethernet Monitor
connector
USB
port 1
Fans Expansion slots
Mouse
Keyboard
Serial port
(COM2)
ports (4)
Gigabit Ethernet
port 2