Spectra Logic Spectra nTier300, Руководство по установке

Страница: 28 / 88

Chapter 2 – Installing the nTier300 VTL
28
5. Fit the tabs on one rail extender between the nut plate and one of the back rack
legs. Then, fit the front tabs on the rail between the nut plate and corresponding
legs on the front of the rack (see Figure 2-14). Tighten all three screws to secure the
nut plate to the rack.
6. Repeat Step 5 to attach the second outer rail to the rack. Set aside any leftover
screws and parts.
7. On the front of the rack, attach two clip nuts, from bag 4, to each leg. Place one
above and another below the rails, with one empty hole separating each clip nut
from the nut plate mounting screws.
o
Figure 2-14 Insert the rail tabs between the nut plate and the rack.
o
Figure 2-15 Attach clip nuts to the front of the rack.
Tabs
Front
(behind post)
Rear
Tabs
Clip nut
Clip nut
Empty hole
Empty hole
Mounting screws
for nut plate