Spectra Logic Spectra nTier300, Руководство по установке

Страница: 57 / 88

Replacing a Data Drive
57
Install the New Drive on the Sled
1.
Using a #2 Phillips screwdriver, unscrew the four screws securing the
malfunctioning drive to the drive sled (Figure 4-5). Remove the drive from the drive
sled and set the drive aside.
2.
Remove the new drive from its anti-static bag.
3.
Place the drive into the sled so that the drive connectors are positioned at the back
of the drive sled and the mounting screw holes are toward the bottom of the drive
sled (Figure 4-5).
4.
Align mounting holes in the drive with the screw holes in the drive sled.
5.
Using a #2 Phillips screwdriver, install the four mounting screws to secure the new
drive to the drive sled, as shown in Figure 4-5.
Install the New Drive
The nTier300 VTL automatically detects the drive when it is installed. The drive
mapping for the RAID volumes in the nTier300 VTL is dynamic. The system determines
the current drive positions during the first system boot and automatically updates the
drive locations to preserve that volume’s preconfigured RAID 6 volume.
Follow these steps to install the new drive:
1.
Put on the provided anti-static wristband and attach it to an unpainted metallic
surface.
Figure 4-5 Remove the screws securing the drive to the drive sled.
Front of sled
Screws
Under side of drive sled
Drive sled
Drive
connectors
handle