Sparc S7-2L, Руководство по обслуживанию

Страница: 85 / 160

Verify a Fan Module
Related Information
■
“Return the Server to the Normal Operating Position” on page 153 .
■
“Remove a Fan Module” on page 79
■
“Verify a Fan Module” on page 85
Verify a Fan Module
1. Verify that the Service Required LED on the replaced fan module is not lit.
See “Fan Module LEDs” on page 78 .
2. Verify that the Top Fan LED and the Service Required LED on the front of the
server are not lit.
See “Front Panel Controls and LEDs” on page 34 .
Note -
If you are replacing a fan module when the server is powered down, the LEDs might
stay lit until power is restored to the server and the server can determine that the fan module is
functioning properly.
3.
Use the Oracle ILOM
show faulty
command to verify that the fault has been
cleared.
See “Identify Faulted Components” on page 28 for more information on using the
show faulty
command.
Consider these two possibilities.
■
If the previous steps did not clear the fault, see “Detecting and Managing
Faults” on page 27 for information about the tools and methods you can use
to diagnose component faults.
■
If the previous steps indicate that no faults have been detected, then the
component has been replaced successfully. No further action is required.
Related Information
■
“Determine Which Fan Module Is Faulty” on page 79
■
“Front Panel Components with Eight Drives” on page 11
■
“Rear Panel Components” on page 19
Servicing Fan Modules 85