Sparc S7-2L, Руководство по обслуживанию

Страница: 135 / 160

Remove the Twelve-Drive Backplane
a.
If removed, install the fan modules.
See “Install a Fan Module” on page 82 .
b. Install the fan cover, and close the fan door.
See “Replace the Fan Cover” on page 149 .
c.
Fully install all storage drives you disengaged or removed.
See “Install a Drive or Drive Filler” on page 72 .
d. Return the server to the normal operating position.
See “Return the Server to the Normal Operating Position” on page 153 .
e.
Reconnect the power cords to the power supplies, and power on the server.
See “Attach Power Cords” on page 154 and “Power On the Server (Oracle
ILOM)” on page 154 or “Power On the Server (System Power Button)” on page 155 .
Verify that the power supply AC OK LED is lit.
Note -
Authorized service personnel might need to reprogram the product serial number on
the drive backplane. This number is used for service entitlement and warranty coverage. The
correct product serial number is located on a label on the front of the chassis.
5.
Use the Oracle ILOM
show faulty
command to verify that the fault has been
cleared.
See “Identify Faulted Components” on page 28 for more information on using the
show faulty
command.
Related Information
■
“Internal Component Locations” on page 20
■
“Remove the Eight-Drive Backplane” on page 131
Remove the Twelve-Drive Backplane
1.
Prepare the server for service.
a. Power off the server and disconnect the power cords from the power
supplies.
Servicing the Drive Backplane 135