37
USING HOT-255 IN WINDOWS 95
•
The Windows 95 folder (i.e., C:\WIN95)
ENSMIX32.EXE
STARTER.EXE
MIXRES32.DLL
SNDSCAPE.INI
•
The Windows 95 Help folder (i.e., C:\WIN95\HELP)
EAPCI95.HLP
AUTOEXEC.BAT
The Install Wizard adds a few lines to the AUTOEXEC.BAT file to initial-
ize AudioPCI™. If the AUTOEXEC.BAT file is missing it will be cre-
ated. The lines added are described below.
Note: In Windows 3.x the only line added to the AUTOEXEC.BAT is “CALL
C:\<path>\INITAP.BAT”, where <path> refers to the AudioPCI™ desti-
nation folder (i.e., C:\EAPCI) indicated during installation. This batch
file contains the lines described below as well as “<AudioPCI™
Path>\APINIT.COM”, which are necessary for the AudioPCI™ to func-
tion.
1. SET SNDSCAPE=<SNDSCAPE.INI location>
The SNDSCAPE environment variable points to the location of the
SNDSCAPE.INI file. This file is installed when you install the Win-
dows 95 driver. It typically resides in the Windows 95 directory.
(i.e., SET SNDSCAPE=C:\WINDOWS).
The SNDSCAPE.INI file is used for backward compatibility with
other ENSONIQ Soundscape cards and should not be removed.
2. SET BLASTER=Axxx Ixx Dx T2
This is included for SoundBlaster Pro compatibility. The “A”
(SoundBlaster Port Address), “I” (Digital Audio Interrupt), and “D”
(DMA Channel) values can be changed in the Device Manager of
Windows 95. See the section entitled “Configuring the ENSONIQ
AudioPCI™ Legacy Device” on page 21 for more details. “T2” in-
dicates stereo SoundBlaster Pro digital audio.
