14
INSTALLING HOT-255
3.
Hold the HOT-255 by the edges and press the connector gently but
firmly into the expansion slot. Remember PCI cards generally are
installed with the component side facing the opposite direction of
ISA cards.
4.
Align the notch in the mounting bracket of the HOT-255 with the
screw hole in the rear panel of the computer case. Use the screw that
you removed from the metal expansion slot cover to secure the HOT-
255 in place. This step is important for proper grounding of the card.
5.
Secure all internal cables before you replace the computer cover. If
you are installing an internal CD-ROM drive, make sure you con-
nect it properly.
6.
Replace the computer cover.
7.
Reconnect any peripheral equipment cables that you may have pre-
viously disconnected.
8.
Make the audio connections you desire to HOT-255’s inputs and
outputs.
9.
If you wish to use a joystick, a MIDI device, or both, connect an
adapter cable to the HOT-255 joystick/MIDI port.
