ST2516 Series Operation Manual
49
7.1.7
COMParator Subsystem Commands
COMParator subsystem commands are used to set the compare function of the insturment,
including the setup of comparator switch, beeper mode, limit mode and other compare
parameters.
Command Tree:
The :COMParator[:STATe] command sets the state of instrument comparator function.
The :COMParator[:STATe]? query returns to the current comparator state.
Command syntax:
:COMParator[:STATe] <ON(1) or OFF(0)>
For example, WrtCmd(“:COMP:STAT ON”); Set the comparator function of the instrument as
“ON”.
Query Syntax: :COMParator:STATe?
Return format: <NR1><NL^END>
<NR1> = 1 or 0
1: the current comparator function of the instrument is “ON”
0: the current comparator function of the instrument is “OFF”
The :COMParator:BEEPer command sets the comparator beeper mode of the instrument.
The :COMParator:BEEPer? query returns to the current beeper mode.
Command syntax:
:COMParator:BEEPer <OFF, HL or IN>
Where, OFF
：
the comparator beeper function is “OFF”
HL
：
it beeps when the comparative result is not qualified
