Sourcetronic ST2516, Руководство пользователя

Страница: 17 / 74

ST2516 Series Operation Manual
11
3.1.3
Measurement Speed
ST2516 displays the measurement result as a 5-digit number in the decimal point floating mode.
The measurement result of the speed is shown as a 4-digit number with one digit after the
decimal point.
1)
Touch the speed zone, the following soft keys will be displayed.

FAST

MED

SLOW1

SLOW2
2) Use above soft keys to modify the speed.
3.1.4 File Manage
1
）
Touch FILE , the following soft keys will be displayed.

File Manage: Touch this key to enter into the file operation page.

Screen Copy
：
Touch this key to capture the current screen and save it to a U disk in image
format. Before a U disk is inserted, the save function will be disabled.

Save Data OFF: Touch this key, this key will turn to <Save Data ON> and each measurement
result will be continuously saved to the .CSV file in U disk. Before a U disk is inserted, the
save function will be disabled. Press the key again, this key will turn to <Save Data OFF> and
the measurement result will not be saved. When switching between ON and OFF once, a
new .CSV file will be created in a U disk. The measurement data can be analyzed by opening
the file through the computer.
2) As for File Manage, please refer to 4.2 for details.
3.1.5 Tools
Operation steps for setting tools:
Touch
TOOLS , the following soft keys will be displayed in the soft key zone.

Display (ON/OFF): Display the measurement result or not. ON is to display, OFF is not to
display.

0 ADJ (ON/OFF): OFF is to turn off the function of short correction, while ON is to turn on
the function of short correction.

0 ADJ: Execute short correction. In this process, please ensure the test terminals have been
correctly shorted.
Only by doing this, unexpected measurement errors could be avoided.
NOTE:
SPEED
：
In SLOW2, SLOW1, MED or FAST mode, the measurement result is a 5-digit number.
SAVE : Once SAVE DATA OFF is selected, you must press SAVE DATA ON to terminate or the saved
data will be lost.
SHORT : When this key is used to take short correction, the test fixture should be correctly