ST2516 Series Operation Manual
8
2.5
Simple Operation
Simple operation steps for ST2516:
Use [MEAS], [SYSTEM] or [FILE] or soft keys to enter into the page required to enter. (Refer
to figure 3-1)
Use arrow buttons (
[←]
[↑]
[→]
[↓]
) to move the cursor to desired zone.
When the cursor is moved to a soft key zone, press ENTER to confirm the selection. If it is
required to input a number or a file name, use the keyboard to input and press ENTER to
finish entry. You can use arrow buttons to select a number or a letter.
ST2516 touch screen operation is much easier. Just use your finger to touch the corresponding
function on the screen and then the corresponding work will be done.
NOTE: DO NOT use acute units or nails to touch the screen. Doing so will cause damage to the
screen, our company shall not be liable to this case.
2.6
Starting Up
Ensure the power earth (ground) wire is grounded, plug into a 3-wire power socket. Press down
the power switch on the bottom left corner of the front panel, the instrument will be started up
and a boot screen will be displayed.
Figure 2-4 shows the boot screen of ST2516, indicating product information such as instrument
trademark, model and version.
Figure 2-4 ST2516 Boot Screen
If the password protection is enabled, you will be asked to input your password. After inputting
your password, press [ENTER] to enter into the main menu page.
NOTE: This series of products have enabled password protection and the default password is
2516. You can reset the password by yourself. Refer to the password function on <SYSTEM
SETUP> page for more details.
