ST2516 Series Operation Manual
30
Operations on file are as follows:
Touch the file name to be edited (If the file name does not exist in the current page, you can
touch [Page 1] and select [
Previous Page
] and [
Next Page
] to toggle between file pages, and then
select the desired file.), the following items will be displayed.
Load
Touch this key, if the file name that the cursor locates is not empty, [YES] and [NO] will
be displayed in the soft key zone. When [YES] is selected, the instrument will load the
setup data in the file; when [NO] is selected, the current operation will be cancelled.
Save
Touch this key, [YES] and [NO] will be displayed in the soft key zone. When [NO] is
selected, the current operation of save file will be cancelled; when [YES] is selected, the
numerical keyboard will pop up and then you can input the file name and press [ENTER]
to finish inputting. Thus the current settings in all pages will be saved to the file. (NOTE:
When storing a file, if the inputting file number has already existed, the save operation
will overwrite the original file.)
Delete
Touch “Delete”, if “YES” is selected, the instrument will delete the file that the cursor
locates.
Copy to E
:
Touch “Copy to E”. The instrument will copy the file the cursor locates or the selected
file to a U disk.
Select
Touch “Select”, the file the cursor locates will be selected. ST2516 can simultaneously
copy several files to a U disk.
Touch “Select” once again, the selected file will be cancelled from selection.
Save Measurement Results
In the “MEAS DISP” page, touch “FILE” and select “Start Save” to save measurement results to a
U disk. Touch “Stop Save”, the instrument will stop saving measurement results.
Save Screen Information:
Touch “FILE” and select “Screen Save” to store the current screen information to a U disk.
Operations of External File and Folder
Operations of external file are similar to that of internal file.
