
- 56 -
SORHEA
G-WALL
11.7 Reset procedure of the IP Address
If a modified IP address of the G-Wall is lost by an end-user, the following procedure allows you to
return to the factory-set IP address
Cut the power supply of the Control Unit (UG).
Set the rotary switch "EVENTS" to "6" and the rotary switch "SENSITIVITY" to "9".
Press the push button "CONFIG” and power the Control Unit (UG) holding down the push
button.
Wait until the buzzer beeps (about 10s).
The IP settings are reset.
Settings Value
IP address
192.168.105.202
Network mask
255.255.255.0
Gateway
192.168.105.1