
- 54 -
SORHEA
G-WALL
Select the desired sensitivity value. (See §7 SETTINGS)
Select
“
Send”
to validate the modification.
The change appears in the list of sensors of the zone.
After changing the desired sensitivity of the sensors, exit configuration mode by selecting
"Detection" then "Send".
After 15 minutes of inactivity on the web pages, the Control Unit (UG) switches to the
mode selected by the configuration mode switch:
Switch position "Zone 1" or "Zone 2": Control Unit (UG) in configuration mode
Switch position “Detect”: Control Unit (UG) in detection mode
Select “Detection” to exit
configuration mode.
List of
sensors of
the zone 2
List of
sensors of
the zone 1
Sensitivity of
the sensor
changed