SORHEA G-WALL, Руководство по установке, Страница: 49 / 59

- 48 -
SORHEA G-WALL
4. Select “
Networking ”
Highlight the line “ Internet Protocol Version 4 (TCP/Ipv4) ” by clicking
Click on “ Properties ”
5. Choose the option “
Use the following IP address “
Enter the following parameters in the different fields:
Parameters Value Notes
IP address 192.168.105.XX
The last number must be comprised
between 1 and 254 (different from 202)
Network mask 255.255.255.0
Mandatory value
Gateway 192.168.105.1 Mandatory value
6. Confirm with “
OK “
11.2 Connection to the Control Unit (UG)
1. The PC is connected to the Control Unit (UG) via a
RJ45 cross-over cable (direct link) or with
RJ45 straight cable using a switch.
2. Verify that the Control Unit (UG) is turned on, the green LED should light-up.
Move switch 1 to "ON" to activate the Ethernet link.
1. Networking
2. Internet Protocol Version 4 (TCP/IPv4)
3. Properties