- 53 -
SORHEA
G-WALL
Choose the detection zone on which will be modified the sensitivity of the sensors: Zone 1 or
Zone 2
Select "
Configuration
" and then "
Send
" to switch the Control Unit (UG) in setting mode.
All fields become grayed out during the configuration zone.
(See §6 IMPLEMENTATION step 2)
Wait until the end of the configuration zone to modify the sensitivity of the sensors
After the configuration phase of the zone the field "Sensor" and "Sensitivity" are available.
Select the number of the sensor for which sensitivity will be modified.
All fields become grayed
out during the configuration
zone.
Choose the detection zone for
changes in sensitivity
Select "Configuration" to
switch the Control Unit (UG) in
setting mode