
- 40 -
SORHEA
G-WALL
Configuration of the selection switch of the cable type:
Each sensor is marked by the letters A and B (visual marker on the sensor).
Identify the markers of the wired sensors on the Link Unit (UR) and move the selection switch of
cable type as shown below:
Cable 1 sensor
Cable 2 sensor
Position of the switch for selection
of the cable type
A
marking
B
marking
Turn switch to
« »
B
marking
A
marking
Turn switch to
« »
A
marking
A
marking
Turn switch to
« »
B
marking
B
marking
Turn switch to
« »
Close the cover of the Termination / Link Unit.
Selection switch for
type of cable
Cable 2 sensor
Cable 1 sensor
Markings A or B
to identify