
- 51 -
SORHEA
G-WALL
11.4 Viewing the Status of the Control Unit (UG)
Click on the “
Visualization
” tab
1. Viewing zones configuration: number of sensors per zone.
2. Viewing intrusion alarms on zones and alarm acknowledgment:
Number sensor alarm, trigger sensitivity
Zone state:
Green: alarm off
Red: alarm on
3. Viewing relay state:
Relay state:
Green: alarm off
Red: alarm on
4. Viewing the sensitivity setting of sensors and the number of alarms before impact.
5. Viewing technical defaults
Technical Default Zone 1: Cable zone 1 default located between the sensor display and its
previous.
Technical Default Zone 2: Cable zone 2 default located between the sensor display and its
previous.
Power Tension: Validation of the supply range.
Default State:
Green: alarm off
Red: alarm on
Gray: Not Used
3
1
2
4
5