Service record Dynamis MV
5 von 36
2021-01-12
2 General Information
All individual settings, adjustments, repairs and the annual inspection of the wheelchair are
described below. This requires tools and special expertise. Please leave these adjustments to a
qualified specialist retailer.
Adjustments that can be made by the attendant are described in the instructions for use.
If you have any questions or comments, please contact your specialist retailer or our team (+49
7254 9279-0).
• M5: 5 Nm;
• M6: 7 Nm;
• M6 (perforated plate) 10 Nm
• M8: 20 Nm;
• M10 (nut): 25 Nm; (caster wheel)
•
Thru axle fitting 40 Nm
• Torque wrench (5-50 Nm)
• Open-ended wrench
• Reversible ratchet with socket wrench inserts
• Hexagon screwdriver
• Phillips screwdriver
• Slotted screwdriver
• Plastic hammer
• Side cutter
• Thread locking liquid
• Bicycle tube repair kit
• Workbench / vice with plastic jaws
• Special open-end wrench for adjusting the shock absorber
2.1 General information on the service booklet
2.2 Documentation notes
2.3 Required torques and tools
Torque required for the following screws:
Needed tools:
Please note:
•
You can find advance booking information on our website at
www.sorgrollstuhltechnik.de
• Information for the user can be found in the instructions for use
• Maintenance information can be found under: Chapter 4 (Repair / Maintenance / Re-use)
