14 von 36
Service record Dynamis MV
Service record Dynamis MV
2021-01-12
ERGO-side guard
Loosen the screw connection of the seat gu-
ard
(A, B, C)
and seat center section. Move the
seat side guard so that the desired seat width is
achieved. Now the previously removed screws
are screwed in again in order to reconnect the
seat side guard with the seat middle part. Please
repeat the same step with the other side guard.
ERGO-back
Loosen the screw connection of the back angle
part
(A, B, C)
and back middle part
(D).
Move
the back angle parts so that the desired width is
achieved. Now the previously removed screws
are screwed back in order to reconnect the
central back and the back angle part. Please
repeat the same steps with the other back angle
section.
(A)
(B)
(C)
(A)
(B)
(C)
(D)
2x
2x
2x
2x
3.2.6 Increase seat width ERGO seat and back unit
3.2
ERGO-seat assembly
(1)
(2)
