26 von 36
Service record Dynamis MV
Service record Dynamis MV
2021-01-12
3.11 Lateral support assembly
3.11.1 Nomenclature
(1)
The pads are made up of the following
parts:
• (A)
Connection
• (B)
Lateral support pads
• (C)
Lateral support holder
• (D)
Locking hinge
• (E)
Stiffening angle
(A)
(1)
(B)
(C)
(D)
3.11.2 Vertical adjustment
(H)
3.11.3 Horizontal setting
(4)
The horizontal adjustment can be done on
the one hand by offsetting the locking joint.
Remove the screws (
4E
), move the locking joint
into the holes (
4I
) (or vice versa), reinsert the
screws and tighten firmly.
Horizontal setting
(5)
The horizontal adjustment can also be
done by moving the pad. Remove covers,
loosen screws (
5G
), move upholstery, tighten
screws again, put covers back on.
Horizontal extension
(6)
An additional horizontal extension can be
achieved by inserting an extension piece (spare
part). Remove screw (
6C
), insert extension pie-
ce and screw tight again at both ends.
(G)
(5)
(I)
(E)
(4)
(6)
(C)
(E)
(2)
The vertical adjustment of the pads is made
on the one hand by moving the locking joint
(
A
). Loosen the screws (
B
), move the locking
joint into the desired position, tighten the
screws (
B
) again.
Vertical adjustment
(2)
The vertical adjustment of the pads can
also be done by turning the C-rail (
C
). Com-
pletely remove the locking joint (
A
) using the
screws (
B
). Remove screws (
D
), turn C-rail 180
°, reinsert screws (
D
) and tighten. Mount the
locking joint (
A
) on the C-rail again using the
screws (
B
) and tighten the screws (
B
).
Another possibility is to adjust the height by
moving the stiffening bracket (
E
)
(A)
(B)
(2)
(B)
(C)
(D)
(3)
(A)
(E)
