Service record Dynamis MV
19 von 36
2021-01-12
Adjustment of the distance between the foot
and seat plate (LLL)
With the standard legrest, the distance bet-
ween the upper edge of the seat plate and
the upper edge of the footplate is changed as
follows:
• (2)
Remove the two screws
(A)
,
• remove the footplate / s and
• move the footplate (s) along the holes
(B)
to the new position (s).
• Reinstall the two screws (A) and tighten
them tightly.
(2)
(A)
(B)
(A)
(B)
(C)
(4)
3.5.6 Height adjustment of the footrest
Distance from the
upper edge of the
seat plate to the
upper edge of the
footplate
When the footplate (s) is in use, both
adjusting screws must lie firmly against the
tubes
(C)
of the leg support. It is essential to
avoid an uneven contact point for the adjus-
ting screws.
(1)
(3)
(A)
Alternative:
1.Remove the screws
(3A)
2. and bring the stirrup to the desired height.
3. Screw in the screws
(3A)
and the stop parts
(3B)
up to the outer tube.
4. Now pull the stirrup down a little
5. and screw in the stop part
(3B)
completely.
(B)
Adjustment of the stop angle of the footplate
(s)
(4)
Use the two adjusting screws
(B)
to adjust
the stop angle of this footplate / s.
• Fold back the footplate (s),
• loosen the lock nuts
(A)
,
• turn the two adjusting screws
(B)
until
you have reached the desired angle,
• tighten the lock nuts
(A)
again.
