Sony UP-DR200, Руководство по обслуживанию, Страница: 67 / 102

6-7
UP-DR200
..... PINCH HOME ERROR
RESTART PRINTER
ERROR LOG display: PINCH HOME ERROR
Detection sensor: Pinch home sensor
Contents: When the pinch motor rotates, it does not reach the HOME position.
Possible cause: 1. The pinch motor or driving block is defective. (SU-134 board)
2. The pinch assembly is defective. (Refer to “4-2. Motor Control”.)
3. The pinch home sensor or the related harness is defective.
(SE-926 board) (Refer to “4-6. Sensor Detection”.)
..... PINCH POS ERROR
RESTART PRINTER
ERROR LOG display: PINCH PRT ERROR, PINCH STBY ERROR, PINCH TAG ERROR or
PINCH FEED ERROR
Detection sensor: Pinch position sensor
Contents:
When the pinch motor rotates, it does not reach the PRT position, STBY position,
TAG position or FEED position.
Possible cause: 1. The pinch motor or driving block is defective. (SU-134 board)
2. The pinch assembly is defective. (Refer to “4-2. Motor Control”.)
3. The pinch position sensor or the related harness is defective.
(SE-926 board) (Refer to “4-6. Sensor Detection”.)
..... CUT HOME ERROR
RESTART PRINTER
ERROR LOG display: CUT HOME ERROR
Detection sensor: Cutter home sensor
Contents: When a cutter moves to the home position, a cutter motor rotates, but a cutter home
sensor is not set low.
Possible cause: 1. The cutter movement is interrupted by the printing paper remaining inside, etc.
2. The cutter assembly or driving block is defective.
(Refer to “4-2. Motor Control” and “4-6. Sensor Detection”.)
..... CUT POS ERROR
RESTART PRINTER
ERROR LOG display: CUT POS ERROR
Detection sensor: Cutter position sensor
Contents: When a cutter moves to the AWAY position, a cutter motor rotates, but a cutter
position sensor is not set low.
Possible cause: 1. The cutter movement is interrupted by the printing paper remaining inside, etc.
2. The cutter assembly or driving block is defective.
(Refer to “4-2. Motor Control” and “4-6. Sensor Detection”.)
..... HEAD QTM ERROR
RESTART PRINTER
ERROR LOG display: HEAD QTM ERROR
Detection sensor: Head thermistor
Contents: The temperature value of a thermal head is abnormal (under
_
20
d
C or more than 100
d
C).
Possible cause: 1. The harness connected to a thermal head is defective.
(Refer to “4-7. Temperature Detection”.)
2. The thermal head is defective.