Sony UP-DR200, Руководство по обслуживанию, Страница: 21 / 102

1-15
UP-DR200
24. Disconnect the harness from the connector (CN371)
on the LE-350 board.
25. Remove the screw, then remove the LE-350 board.
26. Remove the four screws, then remove the vertical
guide assembly.
27. Remove the two hooks, then remove the SE-932
board.
28. Disconnect the harness from the connector (CN381)
on the SE-932 board.
29. Disconnect the harness from the connector (CN331)
on the SE-929 board.
30. Attach the vertical guide assembly in the reverse order
of steps 1 to 29.
BVTT
3
x
6
BVTT
3
x
6
BVTT
3
x
6
LE-350 board
CN371
Harness
Harness
Harness
Vertical guide assembly
Hooks
SE-932 board
CN381
SE-929 board
CN331
1-6-12. Return Guide Assembly
1. Remove the cabinet. (Refer to Section 1-4.)
2. Remove the ribbon door assembly.
(Refer to Section 1-6-1.)
3. Remove the paper door assembly.
(Refer to Section 1-6-2.)
4. Remove the paper holder (main) assembly.
(Refer to Section 1-6-3.)
5. Remove the cutter unit. (Refer to Section 1-6-5.)
6. Remove the pinch motor assembly.
(Refer to Section 1-6-6.)
7. Remove the supply drive assembly.
(Refer to Section 1-6-7.)
8. Remove the cam drive gear.
(Refer to step 5 in Section 1-6-8.)
9. Remove the paper eject guide assembly.
(Refer to Section 1-6-9.)
10. Remove the paper holder stay assembly.
(Refer to Section 1-6-10.)
11. Remove the vertical guide assembly.
(Refer to Section 1-6-11.)
12. Remove the snap ring and two bearings (6).
13. Remove the return guide assembly in the direction of
the arrow.
14. Attach the return guide assembly in the reverse order
of steps 1 to 13.
E5.0
Bearing (6)
Bearing (6)
Return guide assembly