Sony UP-DR200 Скачать руководство пользователя страница 33

Страница: 33 / 102

1-27

UP-DR200

AC inlet

1-8. Recommended Power Cord

This unit does not come with a power cord.
To get a power cord, please contact your local Sony Sales

Office/Service Center.

w
.

Use the approved Power Cord (3-core mains lead)/

Appliance Connector/Plug with earthing-contacts that
conforms to the safety regulations of each country if

applicable.

Use the Power Cord (3-core mains lead)/Appliance

Connector/Plug conforming to the proper ratings (Volt-
age, Ampere).

If you have questions on the use of the below Power Cord/

Appliance Connector/Plug, please contact your local Sony
Sales Office/Service Center.

w
.

Never use an injured power cord.

For customers in the U.S.A. and Canada:

Power cord 125 V 15 A (2.5 m):

1-534-827-14

For customers in European countries except the
United Kingdom:

Power cord 250 V 10 A (2.0 m):

1-551-631-15

If the unit is used in the area except above, please contact

your local Sony Sales Office/Service Center.

In this unit, plug holder is not used for the power cord.

AC inlet

1-9. Unleaded Solder

Boards requiring use of unleaded solder are printed with a
lead free mark (LF) indicating the solder contains no lead.

(Caution: Some printed circuit boards may not come
printed with the lead free mark due to their particular size.)

: LEAD FREE MARK

m
.

Be sure to use the unleaded solder for the printed circuit
board printed with the lead free mark.

The unleaded solder melts at a temperature about 40

higher than the ordinary solder, therefore, it is recom-

mended to use the soldering iron having a temperature
regulator.

The ordinary soldering iron can be used but the iron tip
has to be applied to the solder joint for a slightly longer

time. The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful.

Содержание UP-DR200







































































































Результаты поиска

Содержание UP-DR200

Отзывы:

Sony UP-DR200, Руководство по обслуживанию, Страница: 33 / 102

Результаты поиска

Содержание UP-DR200

Отзывы: