Sony UP-DR200, Руководство по обслуживанию, Страница: 57 / 102

5-1
UP-DR200
Section 5
Service Mode
5-3. INFORMATION Menu
This menu is used to display the information of this unit. It
contains nine items. Select the desired item using
↑
and
↓
keys.
ERROR LOG
A maximum of 20 errors that occurred in the past are displayed
in the ascending order every time you press the
→
key.
(Display example)
Detail information is displayed on each error display
screen when you press the EXEC key.
(Display example)
n
Refer to “Section 6 Troubleshooting” for the description of
display contents.
CURRENT PRINTS
The total number of print sheets after the power is turned
on is displayed.
HEAD PRINTS
The total number of print sheets in the installed thermal
head is displayed.
Reset during thermal head replacement.
Reset
1. Press the
←
,
→
,
←
,
→
, and EXEC keys sequentially
with “HEAD PRINTS” displayed.
2. Check that “0” is displayed in the upper-right position
of the LCD screen.
LOG No.1
CAP PASS ERROR ********
←
*
: Model name
Ver.x.xx
0
0
INITIALIZING S
READY S
R206 63
STS:2
R206:196
TMP:273
P: 39
5-1. Start
1. Turn on the power while pressing and holding the
←
and
→
keys simultaneously.
2. Release these keys when “S” is displayed in the upper-
right position of the LCD screen.
The service mode is started.
n
Ordinary operation can be performed even during start
of the service mode.
5-2. Configuration
The service mode consists of the following menus. Select
the desired menu using
←
and
→
keys and enter an
individual menu using a
↓
key.
.
INFORMATION menu: Displays the information of
this unit.
.
PRINT menu: Prints an internal pattern.
.
SETUP menu: Performs each setting of
this unit.
.
MANUAL MECHA menu: Performs each mechanical
operation.