Sony UP-DR200, Руководство по обслуживанию, Страница: 30 / 102

1-24
UP-DR200
1-6-23. Filter
1. Remove the filter cover in the direction of the arrow.
2. Remove the four hooks, then remove the filter.
3. Attach the filter in the reverse order of steps 1 and 2.
Filter
Filter cover
Hooks
White stripes
Speckled
scratch
1-7. Cleaning the Interior
If defects such as white stripes and speckled scratches
begin to appear in printouts, you may need to clean the
thermal head and rollers. To prevent such occurrences, we
recommend regular cleaning of the thermal head and
rollers using the printing pack replacement cycle (when
one printing pack runs out) as a reference.
Cleaning the thermal head is effective in removing white
stripes, while cleaning the rollers is effective in removing
speckled scratches. When cleaning the interior, always
clean the thermal head before cleaning the rollers. You can
also end the cleaning process after cleaning only the
thermal head.
The following items are necessary to perform interior
cleaning.
.
The cleaning ribbon supplied with the printer (used for
cleaning the thermal head and rollers)
.
The cleaning sheet (Cleaning Sheet 200) supplied with
the printing pack (used for cleaning the rollers)
.
Print paper (used for cleaning the thermal head and
rollers)
m
.
The cleaning ribbon is reusable. Do not throw it away.
.
As the cleaning sheet in not reusable, discard it after the
first use.
.
If there is insufficient print paper remaining, an error
may occur. If this occurs, replace the print paper and
begin the cleaning process again.