Sony UP-DR200, Руководство по обслуживанию, Страница: 18 / 102

1-12
UP-DR200
1-6-9. Paper Eject Guide Assembly
1. Remove the cabinet (Refer to Section 1-4.)
2. Remove the ribbon door assembly.
(Refer to Section 1-6-1.)
3. Remove the cutter unit. (Refer to Section 1-6-5.)
4. Remove the supply drive assembly.
(Refer to Section 1-6-7.)
5. Disconnect the harness from the connector (CN462)
on the CN-3049 board.
6. Remove the four screws, then remove the paper eject
guide assembly.
7. Remove the two hooks, then remove the SE-933
board.
8. Disconnect the harness from the connector (CN401)
on the SE-933 board.
9. Remove the screw, then remove the LE-351 board.
10. Disconnect the harness from the connector (CN391)
on the LE-351 board.
11. Attach the paper eject guide assembly in the reverse
order of steps 1 to 10.
1-6-10. Paper Holder Stay Assembly
1. Remove the cabinet. (Refer to Section 1-4.)
2. Remove the ribbon door assembly.
(Refer to Section 1-6-1.)
3. Remove the paper door assembly.
(Refer to Section 1-6-2.)
4. Remove the paper holder (main) assembly.
(Refer to Section 1-6-3.)
5. Remove the cutter unit. (Refer to Section 1-6-5.)
6. Remove the paper eject guide assembly.
(Refer to Section 1-6-9.)
7. Disconnect the harness from the connector (CN464)
on the CN-3049 board.
8. Remove the four screws (BVTT3
x
6), then remove
the paper holder stay assembly.
9. Remove the screw (BVTT2
x
10), then remove the
SE-931 board and door lock spring.
10. Disconnect the harness from the connector (CN351)
on the SE-931 board.
11. Attach the paper holder stay assembly in the reverse
order of steps 1 to 10.
BVTT
3
x
6
BVTT
3
x
6
Hooks
SE-933 board
CN401
Harness
Harness
CN-3049 board
CN462
Paper eject
guide assembly
LE-351 board
CN391
BVTT
2
x
10
BVTT
3
x
6
BVTT
3
x
6
CN-3049 board
CN464
Paper holder
stay assembly
SE-931 board
Door lock spring
Harness
CN351