62
Display Function Window
Ch
apt
er 3 Men
u
Wind
o
w
display of embedded audio when the BKM-250G is
installed are also detected for gamut error display.
• In over scan mode, 5% mask portion is also detected for
gamut error display. However, the zebra pattern is not
displayed on 5% mask portion.
a
Gamut Error Display
Sets whether or not to display the gamut error (On or
[Off]).
b
Input Detection
Sets whether or not to detect the error of the input signal
([On] or Off).
Pixel Threshold:
Sets the pixel number of the gamut
error in the frame to notify the gamut error detection.
When the pixel number of the error exceeds the set
pixel number, the detection is notified.
Set to [0] to 65535.
When the display mode is 4K/QFHD or 2K/HD Zoom,
the monitor detects the error individually for the signal
displayed on each of the four divided screens (top left,
top right, bottom left and bottom right) using the set
value of Pixel Threshold.
Signal Level:
Sets the upper and lower limits of the
signal level to detect the gamut error for each signal
individually.
SDI YCbCr 10bit:
When the BKM-243HS, BKM-
244CC or BKM-250TG is installed, you can select
this item.
Upper Limit (upper limit)
Y: 0 to 1023 [983]
Cb: 0 to 1023 [1004]
Cr: 0 to 1023 [1004]
Lower Limit (lower limit)
Y: 0 to 1023 [20]
Cb: 0 to 1023 [19]
Cr: 0 to 1023 [19]
SDI RGB 10bit:
When two BKM-243HS or BKM-
244CC are installed in the OPTION 1 and 2 option
slots or BKM-250TG is installed, you can select this
item.
Upper Limit (upper limit)
G: 0 to 1023 [983]
B: 0 to 1023 [983]
R:0 to 1023 [983]
Lower Limit (lower limit)
G: 0 to 1023 [20]
B: 0 to 1023 [20]
R: 0 to 1023 [20]
SDI YCbCr 12bit:
When two BKM-243HS or
BKM-244CC are installed in the OPTION 1 and 2
option slots or the BKM-250TG is installed, you can
select this item.
Upper Limit (upper limit)
Y: 0 to 4095 [3935]
Cb: 0 to 4095 [4019]
Cr: 0 to 4095 [4019]
Lower Limit (lower limit)
Y: 0 to 4095 [80]
Cb: 0 to 4095 [77]
Cr: 0 to 4095 [77]
SDI RGB 12bit:
When two BKM-243HS or BKM-
244CC are installed in the OPTION 1 and 2 option
slots or the BKM-250TG is installed, you can select
this item.
Upper Limit (upper limit)
G: 0 to 4095 [3935]
B: 0 to 4095 [3935]
R: 0 to 4095 [3935]
Lower Limit (lower limit)
G: 0 to 4095 [80]
B: 0 to 4095 [80]
R: 0 to 4095 [80]
HDMI YCbCr
Upper Limit (upper limit)
Y: 0 to 4095 [3935] (12bit conversion value)
Cb: 0 to 4095 [4019] (12bit conversion value)
Cr: 0 to 4095 [4019] (12bit conversion value)
Lower Limit (lower limit)
Y: 0 to 4095 [80] (12bit conversion value)
Cb: 0 to 4095 [77] (12bit conversion value)
Cr: 0 to 4095 [77] (12bit conversion value)
HDMI RGB
Upper Limit (upper limit)
G: 0 to 4095 [3935] (12bit conversion value)
B: 0 to 4095 [3935] (12bit conversion value)
R: 0 to 4095 [3935] (12bit conversion value)
Lower Limit (lower limit)
G: 0 to 4095 [80] (12bit conversion value)
B: 0 to 4095 [80] (12bit conversion value)
R: 0 to 4095 [80] (12bit conversion value)
c
Post-Process Detection
Sets whether or not to detect the error for the signal after
YCbCr is converted to RGB. (On or [Off]).
Pixel Threshold:
Sets the pixel number of the gamut error
in the frame to notify the gamut error detection.
When the pixel number of the error exceeds the set pixel
number, the detection is notified.
Set to [0] to 65535.
When the display mode is 4K/QFHD or 2K/HD Zoom, the
monitor detects the error individually for the signal
displayed on each of the four divided screens (top left, top
Note
Note
