13
Location and Function of Parts
Chapt
er 1 Ov
e
rv
ie
w
not be connected to SRM Manager and the correct picture
may not be displayed.
e
OPTION C connector (D-sub 9-pin)
Used for future expansion.
The cover is attached at the factory.
f
Input option slots
Used to install the optional input adaptors.
For installing the input adaptor, see page 18.
For the input signals, see “Input/Output Connector and
Adaptor” on page 9.
g
DVI-D (DVI digital) input connector
Inputs DVI Rev.1.0 applicable Single-link digital RGB
signal.
To input the DVI signal of SXGA or higher resolution, use
the cable within 3 m (118
1
/8
inches) in length.
h
HDMI input connector
Inputs the HDMI signal.
HDMI (High-Definition Multimedia Interface) is an
interface that supports both video and audio on a single
digital connection, allowing you to display high quality
digital picture. The HDMI specification supports HDCP
(High-bandwidth Digital Content Protection), a copy
protection technology that incorporates coding technology
for digital video signals.
• The monitor does not support the HDMI audio signal.
• Use HDMI compliant cable (not supplied), Category 2
(High Speed HDMI cable), with HDMI logo.
Right Side Panel
a
MAIN POWER switch
When turned on (
?
), the monitor enters operation mode.
b
AC IN connector (3-pin)
Connects the monitor to an AC power source, via the
supplied AC power cord.
Notes
1
MAIN POWER switch
2
AC IN connector
