Sony PXW-X320, Руководство по эксплуатации

Страница: 23 / 223

23
m
RET (return video) button
You can use this as an assignable switch (see
page 167) .
Use this to check the video when Lens RET is
assigned to this button (factory default setting). If
you press this after recording stops, the last few
seconds recorded appear on the viewfinder screen
(recording review)
(see page 88) .
Pressing this button (single click) during
recording or playback records a Shot Mark 1
mark, and double-clicking records a Shot Mark 2
mark
(see page 90) .
n
VTR button
Use this to start and stop recording. Press once to
start recording, then press once more to stop.
a
Connector
Connect to the VF connector (26-pin) on the
camcorder.
b
Slide stopper
Prevents the viewfinder from coming off the
camcorder when it is slid from side to side.
c
Eyecup
d
Diopter adjustment ring
Allows for optimal focus adjustment.
e
Eyepiece
You can raise this up when required by the
situation.
f
Viewfinder barrel
You can raise this up or rotate when required by
the situation.
g
Tally indicator
Lights up when recording is started by a press of
the REC START button on this camcorder, the
VTR button on the lens, or the VTR button on the
remote control unit.
When an abnormality occurs, the tally indicator
flashes to indicate a warning.
h
PEAKING control
Turning this knob clockwise adjusts the picture
sharpness, and makes focusing easier. This
control has no effect on the output signals of the
camcorder.
i
CONTRAST control
Adjusts the contrast of the screen. This control
has no effect on the output signals of the
camcorder.
j
BRIGHT control
Adjusts the brightness of the screen. This control
has no effect on the output signals of the
camcorder.
k
TALLY switch
Controls the tally indicator located on the front of
the viewfinder.
HIGH: The tally indicator brightness is set to
high.
OFF: The tally indicator is disabled.
LOW: The tally indicator brightness is set to low.
l
ZEBRA (zebra pattern) switch
Controls the zebra pattern display on the
viewfinder screen as follows.
ON: Display a zebra pattern.
OFF: Do not display a zebra pattern.
m
DISPLAY switch
ON: Display text information.
Viewfinder