manualshive.com logo in svg

Sony MAV-777, Руководство по эксплуатации, Страница: 84 / 148

Поделиться
Скачать
Sony MAV-777 Скачать руководство пользователя страница 84

3-60 (E)

Chapter 3

Operating Modes

3-7 Dialog Box Operations

3-7-7 Warning Dialog Box

In Timer Rec/Play mode, a buzzer sounds when recording or play fails, and the
Warning dialog box appears when ERROR is displayed in the event status
column. When WARNING is displayed in the event status column, the
Warning dialog box does not appear.

Warning dialog box

Selected information display column messages

When an error or warning event is selected with the cursor in Timer Rec/Play
mode, the error or warning message is displayed in the selected event’s
information display column.

Event status

ERROR

WARNING

Displayed message

Timer Event Standby
Failed.

Timer Event Start Failed.

Timer Event Unload
Failed.

Timer Event Material
Unloaded.

Waiting For Manual
Record Trigger Time
Over.

Timer Event Expired.

Port Resource For Timer
Event Unavailable.

Lack Of Remain Time
For Timer Event.

Unexpected Material Is
Unloaded.

Manual Record Should
Be Started.

Description

The device failed to enter Standby (OPEN
or Cue Up).

The device failed to start (Rec or Play).

The device failed to unload.

The material was closed while recording or
playing.

The device did not start recording when
the manual recording timer event output
was enabled.

The reserved start date of the 1 Time or
Loop timer events expired. (When the
power is on.)

When the power is on, the specified port
for timer events does not exist.

Insufficient recording space for recording
in Standby mode.

The specified file was not opened at the
port in Standby mode.

Manual event recording did not start when
the play standby time was reached.

Содержание MAV-777





















































































































































Отзывы:

Нет отзывов