Sony MAV-777, Руководство по эксплуатации

Страница: 30 / 148

3-6 (E)
Chapter 3 Operating Modes
3-2 Material Mode
3-2-4 Sor ting the Material List
In Material mode you can sort the material shown in the material list, using
material attributes as keys. A material has the following attributes:
Material name (NAME): A name for the material consisting of a
maximum of 23 ASCII characters
Material number (NUMBER): A number attached to the material
Material length (LENGTH): The length of the material
Update date (UPDATE): The date and time of creation or last update
of the material
In addition, material has the following attributes:
Material protect (PROTECT): Shows whether material can be deleted and
attributes changed.
Signal type (TYPE): Shows whether the material is stored in
HDCAM format.
Picture quality (QUALITY): Shows whether the material is stored in
HDCAM format.
Material type (CATEGORY): Shows whether material is recorded (RAW)
or edited (EDITED).
To sort the material list by specific attribute
To sort the material list, use the following procedure.
1
Enter Material mode.
2
Press one of the function keys L1 to L4 according to the attribute by which
you want to sort. This sorts the material list ascending by the attribute
corresponding to the key.
Note
After sorting the cursor position does not move from the material selected
before the sort.
3-2-5 Selecting the Active Material (SELECT A CTIVE)
The material assigned to the port which is currently the subject of operation is
termed the “active material”. By pressing the SELECT ACTIVE key you can
rapidly select the active material.
To select the active material
1
Press function key B7 (Select Active).
The cursor jumps to the line for the material assigned to the port currently
the subject of operation, and the active material is now selected.