Sony MAV-777, Руководство по эксплуатации

Страница: 101 / 148

Chapter 5 Playback
5-7 (E)
5
Press the PLAY button to start synchronized playback.
During synchronized playback, you can use jog or variable mode
playback.
6
To stop synchronized playback, press the STOP button.
7
To exit synchronized playback mode, simultaneously press both PORT
SELECT buttons that are lit.
If you press a PORT SELECT button that was not selected for
synchronized playback, the unit switches to that port but synchronized
playback mode is not canceled. If you press a PORT SELECT button for
one of the ports selected for synchronized playback, the unit re-enters
synchronized playback mode and the material of the selected button is
displayed in the current port area of the LCD.
5-2-4 Loop Playback
You can set playback so that it starts at the beginning of a material, plays back
to the end, and restarts playback from the beginning in a continuous loop.
Notes
• Make sure that the material you set for loop playback is at least 1 second
long. If the material is shorter than 1 second loop playback may not be
executed correctly.
• Loop playback cannot be executed with material being recorded in loop
playback or with material designated as LIVEx in DTR mode.
• Loop playback cannot be used when the MAV-777 is in BVE mode.
Performing loop playback
1
In CP Setup mode, set menu item 0005: Playback Loading Option to Loop.
When you select “Individual”, set CP Setup mode 5007, 5008, 5009: Play
Loading Option P1 (P2 or P3) to “LOOP”.
2
Load the material and play it back.
You can use jog mode, shuttle mode, variable mode, REW, and F FWD
playback during loop playback.
During loop playback, LOOP is displayed in the current port area of the
LCD.