Sony LSM-100, Руководство по эксплуатации

Страница: 8 / 53

4
Show Information
Ch
ap
te
r
1
Us
er Guide
- R1
1
0
• Element Type
Indicates the type of the currently playing Content
Element, e.g., Feature, Trailer, etc.
• Element Title
The Name or Title of the currently playing Content
Element, e.g., MI-4.
• Progress Bar
The Progress Bar provides a graphic representation of
the progress of the presentation.
• Current Position
Indicates the current position of the presentation.
When the Show is running this indicates the elapsed
running time. When the Show is stopped the Current
Position indicates the point in the presentation where
presentation will resume when you tap
PLAY .
• Running/Remaining Time
An alternate display indicating either the Remaining
Time or the Total Running Time for the current
presentation. (Tap to change.)
• PLAY/STOP button
An alternate action ( PLAY/STOP ) screen “button”
which indicates what action will occurs when it is
tapped. In the illustration the current element has been
stopped.
• REWIND button
Available only when the current presentation has been
stopped. Normal action when a presentation is stopped
is to RESUME on PLAY from the presentation’s
current position. Tap
REWIND to reset the
presentation’s current position to the beginning of the
Show.
STOP/PLAY Show Presentation
Basic Show Controls appear on the Show Information
pane. These controls are “modal”, that is they are current
mode dependant. For example, when the show is in the
Play mode the only control available to the projectionist is
STOP
STOP Show Presentation
To terminate presentation of the Current
Show, tap the
STOP
button (shown to the
right) on the Show Information pane. Show
presentation halts and the screen goes dark.
The current position of the presentation is
retained and subsequent execution of
PLAY
will resume the presentation from the current
position in the Show timeline .
When STOP has been executed the
REWIND button appears to allow you to
reset the current position of the presentation to the Start of
the Show.
REWIND only appears when the current
presentation has been stopped. To reset the presentation’s
starting point to the Start of Show, tap REWIND .
STOP processing requires nominally 3 seconds before the
presentation on the screen ends.
START Show Presentation
When the show is in the Stop mode the PLAY control is
available to the projectionist. In addition, the REWIND
control will be available if a running presentation was
stopped.
To initiate presentation of the indicated
Show (in Show Information) from the
Current Position , tap the PLAY button.
PLAY processing requires 6 seconds
(nominally) before the presentation appears
on the screen.
Note: Executing PLAY begins presentation
of the show from the current position as
displayed in the Show Information pane . To
reset the start point to the beginning of the presentation tap
REWIND and then tap PLAY .
Pause/Resume Show Presentation
To pause presentation of the current Show, tap STOP and
then, when ready to resume presentation, tap PLAY . The
current position of the presentation is retained unless
REWIND is executed .