Sony LSM-100, Руководство по эксплуатации

Страница: 47 / 53

43
Status
Cha
p
te
r 2
Us
er
Gu
ide -
R
2
2
0
• Primary (IP address)
To set the Primary DNS Server static IP address, tap
Primary and the Enter Address popup appears.
To set a new DNS Server IP address, tap CLEAR ,
set the new address by tapping the numbers on the
Keypad , and then tap Accept .
Note: Entering the DNS Server IP address from the
ENTER ADDRESS popup uses the “dotted
decimal” format and must include the “dot(s)” as
part of the entry.
• Secondary (IP address)
To set the Secondary DNS Server static IP address,
tap
Secondary and the Enter Address popup
appears. To set a new DNS Server IP address, tap
CLEAR , set the new address by tapping the
numbers on the Keypad , and then tap Accept .
Automatic (IP address)
If a Dynamic Host Configuration Protocol (DHCP)
server is available you can select the Automatic DNS
ADDRESS ASSIGNMENT option and DNS Server
addresses are included in information obtained from
the DHCP server.
To set the Automatic IP address option, tap
AUTOMATIC in the IP ADDRESS ASSIGNMENT
group. The appropriate value for the Primary DNS IP
address and Secondary DNS Server IP address are
obtained from the DHCP server.
Status
Device related Status Messages appear at the top of the
Projectionist Terminal Screen in the area normally
occupied by the Current User information and the Date &
Time. This Status Message area is common to all screens
and the messages appear when the Status Indicator Lamp
is flashing red or yellow. Tap the
Close button to remove
the Status Message from the Projectionist Terminal.
System Status Warning indicators/buttons appear along
the bottom of the Projectionist Terminal basic screen.
The Status indicators are common to all screens and when
tapped directly access the various system status panes.
Under normal conditions their appearance is as sown in the
illustration.
When you tap an indicator to access the
associated Status pane its appearance
changes as shown to the right.
When the associated sub-system is in alarm
the appearance of the indicator changes as
shown to the right.
ENTER ADDRESS (popup)
Current
IP address
Accept
CLEAR
Keypad “dot”
Status Messages
Status Message Status Lamp
SMS Computer is Off-line Red/Flash
Encl. Temp exceeded ErrLevel Red/Flash
PDU is Off-line Red/Flash
Media Block Error Red/Flash
RAID is not ready Red/Flash
UPS: Abnormal Condition Yellow/Flash
UPS: Replace Battery Yellow/Flash
Tap for Menu
Status Messages
Status
Lamps &
Selector
Buttons
Tap for
Power Status
Tap for
Lamp Status
Tap for
Fan Status
Tap for
Temperature Status
Tap for
Message
Close