Sony DVCAM DSR-50, Руководство по обслуживанию

Страница: 20 / 285

1-12
Chapter 3 Playback and Recording
Chapter 3 Playback and Recording
51
(GB)
2
Press the playback button on the player.
The player starts playback.
3
Press the PLAY button while pressing the REC button.
The unit starts recording and the index is marked.
To stop recording
Press the STOP button on the unit.
To pause recording
Press the PAUSE button on the unit.
To start recording using the DSRM-20 Remote Control Unit
(not supplied)
Press the PLAY button while pressing the REC button.
To record without inputting any video signals
Set the INPUT SELECT selector to other than DV, then set the COLOR
BAR (for DSR-50)/COLOUR BAR (for DSR-50P) on the DISPLAY SET
menu to ON. The color bars are recorded on the tape. The sound is
recorded according to the setting of the audio input selectors.
Note
The unit does not record any pictures unless the video signals are input
(except when inputting signals from the DV IN/OUT connector). If there
are no video signals or signals are interrupted during recording, the unit
pauses; if signals resume, the unit resumes recording.
Recording
Chapter 3 Playback and Recording
52
(GB) Chapter 3 Playback and Recording
Other Recording Functions
Marking an index
By pressing the INDEX button during a recording, you can mark an index
signal at any place in the tape. The index signal is marked for five seconds.
If you mark an index at the scene you want to search for, you can easily
search for the scene later.
When you start recording in the stop mode, the index signal is marked
automatically.
If you press the INDEX button while recording, the INDEX MARK
indicator appears for seven seconds on the LCD monitor and the VIDEO
OUT1 output (if you have turned on the SUPERIMPOSE switch) and the
index is marked.
If you use a cassette with cassette memory, the index will also be marked
in the cassette memory.
Notes
¥ You cannot mark a new index while the INDEX MARK indicator is
showing.
¥ If you record on a location in the tape where an index has been marked,
the index will be erased. You cannot delete just an index while keeping
the image or sound.
¥ You cannot mark an index during playback, duplicate or audio dubbing
operations. The INDEX button is disabled in these operations.
¥ The cassette memory space available limits the number of the indexes
that you can mark by pressing the INDEX button. When you use a
previously recorded tape for repeated recording, make more memory
space available by erasing unwanted items using ITEM ERASE or
ERASE ALL on the CM SET menu before you start recording.
To use an index during playback
You will need the DSRM-20 remote control unit (not supplied).
For details on the playback function using the DSRM-20, see Other Playback
Functions on page 55 (GB).
Chapter 3 Playback and Recording
Chapter 3 Playback and Recording
53
(GB)
Playback
This section describes the required settings and operations to perform
playback on this unit.
For details on connection, see Connections on page 35 (GB).
Settings for Playback
1
Turn on the POWER switch.
2
Turn on the power to the video monitor and set the switches of the
monitor as shown below.
Switch Setting
75
Ω
ON (or attach a 75
Ω
terminator)
Input switch Set according to the type of input signal from this unit.
1
2
Video monitor
DSR-50/50P
Playback
Chapter 3 Playback and Recording
54
(GB) Chapter 3 Playback and Recording
Playback Procedure
1
After checking the tape for slack, hold the cassette so that the tape
window is facing upward, then insert it into this unit.
For details on checking the tape for slack, see Notes on Video Cassettes on
page 40 (GB).
Note
Do not insert the cassette forcibly. The unit may be damaged.
2
Press the PLAY button.
This starts the playback operation.
To stop playback
Press the STOP button.
To pause playback
Press the PAUSE button.
Note
When the unit is playing the part of the tape where the format has been
changed between the DVCAM format and the DV format, the picture and
sound may be distorted.
1
2