Sony DVCAM DSR-50, Руководство по обслуживанию, Страница: 17 / 285

1-9
Chapter 2 Preparations
39
(GB)
Chapter 2 Preparations
To video equipment without a DV jack (when using the DSR-50/50P as a player)
You can connect this unit to video equipment without a DV jack. Use this
unit as a player as follows.
The following shows an example configuration of dubbing a tape with its
time code in the externally-synchronized playback mode. In this
configuration, the recorder is a VCR equipped with component input
connectors.
Notes
¥ If you connect the input connectors of this VCR to the output connectors
of the monitor or recorder, a humming noise may be generated or the
image may be distorted.
¥ Text data (time code, warnings, menus, etc.) are superimposed only on
the signal sent to the VIDEO OUT1 output.
¥ To play back synchronized with the reference video (black burst) signal,
set the EXT SYNC on the VIDEO SET menu to ON.
Monitor
75
Ω
coaxial cable (not supplied)
DSR-50/50P (player) (right panel)
to the audio input
jack
to the video input
connector
Reference signal
generator
SG
to the
B.B.OUT
connector
to the
B.B.OUT
connector
75
Ω
coaxial cable
(not supplied)
75
Ω
coaxial cable
(not supplied)
Phono jack cable (not
supplied)
to the REF.VIDEO
connector
recorder
to the time code
input connector
to the
audio
input
connectors
to the
component input
connectors
75
Ω
coaxial cable
(not supplied)
Video cable (3BNC
y
3BNC) (not supplied)
Conversion cable (XLR
y
phono) (not supplied)
: Signal flow
Amplifier (as needed)
Notes on Video Cassettes
Chapter 3 Playback and Recording
40
(GB) Chapter 3 Playback and Recording
Notes on Video Cassettes
Usable cassettes
Use Standard-DVCAM cassettes or Mini-DVCAM cassettes with this unit.
PDV-184 can record programs for 184 minutes and PDVM-40 can record
for 40 minutes (DVCAM format).
You can get the highest quality pictures with this digital videocassette
recorder using DVCAM cassettes. You may not be able to get as good
quality with other cassettes. We recommend using DVCAM cassettes so
that you can record your one-time events in the highest quality.
Cassette memory
Cassette memory is an optional feature that is mounted on some Standard
DVCAM cassettes and Mini DVCAM cassettes. When you record a
program, the recording date and time, and the programs position on the
tape are stored in the cassette memory so that you can quickly locate the
program later on.
indicates that you can use the cassettes to store
up to 16 kbits of data. On this unit, you can use cassettes on which up to 16
kbits of data can be stored.
To save a recording
To prevent accidental erasure of a recording, slide in the REC/SAVE
switch on the cassette so that the red portion becomes visible. To record on
a tape, slide out the switch so that the red portion is hidden.
DVCAM cassette
REC/SAVE switch
Mini DVCAM cassette
REC
SAVE
Set to SAVE.
Chapter 3 Playback and Recording
Chapter 3 Playback and Recording
41
(GB)
Checking the tape for slack
Using a paper clip or a similar object, turn the reel gently in the direction
shown by the arrow. If the reel does not move, there is no slack.
Inserting/Ejecting Cassettes
To insert a cassette
Notes
¥ Do not insert the cassette forcibly. The unit may be damaged.
¥ Do not eject/load the cassette in a place subject to light. Make sure to
close the cassette lid when using the unit. The internal sensor of the unit
may operate incorrectly if too much light falls on the unit.
1
With the unit powered on, slide the OPEN switch to the right and
unlock the cassette lid. Open the cassette lid.
Paper clip, etc.
Reel
Chapter 3 Pla
ybac
k and Recor
ding
Notes on Video Cassettes
Chapter 3 Playback and Recording
42
(GB) Chapter 3 Playback and Recording
2
After checking the tape for slack, hold the cassette so that the tape
window is facing upward, then insert it into the unit.
The cassette is automatically loaded into the unit.
3
Close the cassette lid.
To eject the cassette
1
With the unit powered on, open the cassette lid. Press the EJECT
button located at the right side of the cassette compartment.
The cassette is unloaded and ejected.
Mini cassette
Insert the mini cassette into the
center of the cassette compartment.
Standard cassette
Tape window facing upward