Sony DVCAM DSR-50, Руководство по обслуживанию

Страница: 16 / 285

1-8
Chapter 2 Preparations
35
(GB)
Chapter 2 Preparations
Power Preparations Connections
This section describes basic connections for recording or playback on the
unit.
Connections for Recording
To an external camera
The unit can provide an external camera with power.
To provide power to the camera from the unit, see Notes on Using the DC IN
12V Connector on the previous page.
Some cameras cannot accept power from the CAMERA connector.
For details, refer to the instruction manual of the camera.
Note
Use the CCZ-A s for the camera cable to meet the FCC Rules and
EN55103-1. (The last numbers indicated by s are different depending on
the cable length.)
Camera
DSR-50/50P (right panel)
to the
camera
connector
Camera cable CCZ-A s (not supplied)
: Signal flow
Connections
36
(GB) Chapter 2 Preparations
Chapter 2 Preparations
To digital video equipment with the DV jack
The video and audio signals are sent with hardly any degradation, enabling
high-quality recording. The signal flow is automatically detected so you
need not make separate connections for input and output.
Notes
¥ The DV IN/OUT connector in the unit is a 6-pin type but does not
provide power to external equipment.
¥ With the DV connection, the data codes (recording date/time, camera
data) recorded on the tape in the player will be transmitted to the unit. To
display the same data code recorded on the source tape, set the DATA
CODE on the DISPLAY SET menu to DATE or CAMERA, or press the
DATA CODE button on the DSRM-20 remote control unit (not supplied)
when you play back the recorded tape. However, the contents of the
cassette memory are not transmitted. If you want to transmit the contents
of the cassette memory, use the duplicate function.
For details on duplicate function, see Duplication (generating a work tape with
the same time code) on page 70 (GB).
¥ When no picture appears via the DV jack, disconnect, then reconnect the
i.LINK cable (DV cable).
Digital video equipment
with a DV jack
DSR-50/50P (right panel)
to the
DV jack
i.LINK cable (DV cable)
(not supplied)
: Signal flow
Chapter 2 Preparations
37
(GB)
Chapter 2 Preparations
To video equipment without a DV jack (when using the DSR-50/50P as a recorder)
You can connect this unit to video equipment without a DV jack. Use this
unit as a recorder as follows.
Connect one of the followings as a video cable; S-video cable or 75
Ω
coaxial cable.
Notes
¥ When recording analog input signals, this unit can digitally output
signals from the DV IN/OUT connector for backup. Set the DV EE OUT
on the VTR SET menu to ON.
¥ If you connect the output connectors of this VCR to the input connectors
of the player, a humming noise may be generated or the image may be
distorted.
¥ Distorted signals (e.g., when played back at a speed other than normal)
will not be recorded properly.
Player
DSR-50/50P (Recorder) (right panel)
to the S-video output
connector
to the video output
connector
to the audio output
connector
S-video cable (not supplied)
75
Ω
coaxial cable (not supplied)
Audio cable (XLR) (not supplied)
: Signal flow
Connections
38
(GB) Chapter 2 Preparations
Chapter 2 Preparations
Connections for Playback
To an external monitor
Connect one of the followings as a video cable; video cable (3BNC
y
3BNC), 75
Ω
coaxial cable, or S-video cable.
Notes
¥ If you connect the input connectors of this VCR to the output connectors
of the monitor, a humming noise may be generated or the image may be
distorted.
¥ Text data (time code, warnings, menus, etc.) are superimposed only on
the signal sent to the VIDEO OUT1 output.
Monitor
DSR-50/50P (right panel)
to the audio
input jack
to the
component input
connectors
to the video
input connector
to the S-video input
connector
Phono jack cable (not supplied)
Video cable (3BNC y 3BNC) (not supplied)
75
Ω
coaxial cable (not supplied)
S-video cable (not supplied)
: Signal flow