Sony CCD-M8, Руководство по обслуживанию

Страница: 136 / 166

2·3· 1 6.
Loading Slider S Assembly
1 . Removal
1) By referring to 2- 1 - 1 and 2-1 -2. remove cassette arm
assembly and LS cassette compartment assembly.
2) By referring to 2-3-10. remove LS chassis assembly.
3) By referring to 2-3- 14. remove TG-4 base assembly and TG-
5 base assembly.
4)
By referring to 2-3-25. remove drum assembly.
5) By referring to 2-3-1 5: remove loading slider T assembly.
6)
Remove screw 0 and remove S slider stopper 8
7)
Remov
�
2 guide rollers
8
and remove loading slider S
assembly
Q
.(See Fig.2-21 )
2 .
I nstallation
1 ) Apply molten grease to the arrow marked point o f shaft
0 . as shown in Fig. A.
2) Apply molten grease to the arrow marked point of loading
slider S assembly
0
. as shown in Fig.B.
0 Screw-
i
•
s 'Nd"
t"I
0
Guide
0
Loading slider S assembly
Fig.
A
3) Install loading slider S assembly
0
by matching hole 0
of loading slider S assembly to hole
0
of the mechanical
chassis.
4) Install 2 guide rollers
0 .
5) Install 2 S slider stopper
8 with screw 0 .
6) By referring to 2·3-1 5. install loading slider T assembly.
7) By referring to 2-3-25. install drum assembly.
8) By referring to 2-3-14. install TG-4 base assembly and TG-5
base assembly.
9)
By referring to 2-3- 10. install cassette arm assembly and LS
cassette compartment assembly.
10) By referring to 2-1 - 1 and 2-1-2. install cassette arm
assembly and LS cassette compartment assembly.
Note:
By referring to 2-1-1 and 2·1-2, perform phase adjustment after
loading slider
T
assembly has bean installed.
Fig. B
Fig.
2-29
-
4
9
-