Sony CCD-M8, Руководство по обслуживанию

Страница: 123 / 166

2-3-2. Pendulum Stopper Plate
1 .
Removal
1 )
By referring to
2-1 - 1
and
2- 1 -2.
remove the cassette arm
assembly and LS cassette compartment assembly.
2)
By referring to
2-3-1.
remove reel lock lever assembly.
3)
Push LED assembly
1
in the direction of arrow
Q .
and
remove claw
f) .
4)
Remove
2
screws
f) .
5)
Remove pendulum stopper plate
0
from the
2
positions
of claws $ .
Note:
As claw
f)
is easily broken, precaution should be taken in
installation and removal. (See Fig. 2-13)
2. I nstallation
1)
Set in mode. and wind TG- 1 band
assembly
0
tightly to S reel.
f) Cla w
O LED assembly
0
TG- 1
band assembly @ Claw
2)
See to it that the LED assembly
0
is mounted on the
pendulum stopper plate O. and fasten to
2
positions of the
claw and
2
positions of the dowel.
3)
Install
2
screws
f) .
4)
Hook claw
0
of LED assembly
O .
and insert by pushing
in the direction of arrow © .
5)
Set to EJECT mode.
6)
By referring to
2-3- 1 .
install the reel lock lever assembly.
7)
By referring to
2- 1-1
and
2- 1-2.
install the cassette arm
assembly and LS cassette compartment assembly.
Note:
Caution should be taken that the
TG-1
band assembly
0
is
not clasped in when installing the pendulum stopper plate.
Pendulum stopper plate
Dowel
Fig. 2- 13
-36-