Sony CCD-M8, Руководство по обслуживанию

Страница: 113 / 166

2-1 -3.
Extracting Method with the Cassette Loading End
State
1 )
By referring
2-3-22,
set
MD- 1 0
board up t o b e able to
open.
2)
B y referring
2-1-5 ,
connect the mode selector.
Note:
The mode indicated by
C::::J
is set by pushing the buttons of
the mode selector.
3)
Set up GUIDE LOAD mode, and move each tape
guide from the position shown in Fig. 2-4 to the posi­
tion shown in Fig. 2-5 .
4)
Open M D- 1 0 board
0,
and wind up tape into cassette
by rotating the rotor
8
in the direction of arrow.
(
See Fig. 2-3)
Note:
Though in G U I D E LOAD mode, cannot wind up tape when
each guide is not positioned as shown in Fig. 2-5, close to the
cassette.
5 )
B e sure t o wind u p tape completely, and set u p
mode, then take out the cassette.
@
Rotor
Capstan motor
Fig.
2-3
-26-
0
MD- 10 board