Sony BVH-2000, Руководство по эксплуатации и обслуживанию

Страница: 39 / 505

Both
&
buttons
When both P and R buttons are pressed
and
the VTRs can be
is
necessary to set the PARA-RUN
switch on the SY-79 board to ON.
When both these button lamps are off,
only this VTR can be operated or the
communication between the recorder
@
SEARCH dial
By turning this dial during the JOG, SHUTTLE,
PROGRAM
JOG, or PROGRAM PLAY modes
it to change the
UJ.J.',,",vL.LV.U
speed the tape run.
(2)
If this dial is turned during the STOP, STANDBY,
PLA Y, or REC mode,
it is possible to previously
the PROGRAM JOG or PROGRAM PLAY mode.
The set speed is displayed
in block 3 on the
@
SHUTTLE button
When the SHUTTLE button is pressed, the lamp lights
state, if the SEARCH dial
@
is turned to either the
right or left and stopped at any position, playback will
at speed ( 50
the center the picture is still. SEARCH
dial has "clicks" at the center and ±50 positions.
• For fast winding in the forward direction, the
is
1I'"art"11r"'t:.Hi
automatically
end, and the unit stops automatically. If you wish
to wind the tape completely, turn the SEARCH dial
to the
the board OFF.
• For fast winding in the reverse direction (rewinding),
the tape speed is reduced automatically
at the tape
zero set position.
• If you wish to rewind the tape completely, turn the
SEARCH dial
to the left
STOP switch the SY-80 board OFF.
• If the still mode is held for 3 minutes or more, the
machine
enters the STOP mode automatically to
prevent tape.
machine to stop, turn off the STILL OFF ENABLE
switch (S9-6) on the SY-79 board.
1-29
not identified by clicks.
• If the STILL mode is held for 3 minutes or more,
the machine will
the
If you don't want the machine stop, turn
off the STILL OFF ENABLE switch (S9-6) on
the SY-79 board.
z
o
~
cr:
w
c,
o